seven tips of wicker furniture maintenance

- Jul 04, 2018-


Wicker furniture looks fresh and elegant, the lines are smooth and natural, and it gives a kind of pastoral earthiness visually, which makes people feel like close to nature. And the material of wicker furniture is green and pure natural material. How to maintenance wicker furniture?

First, moisture and deformation

Wicker furniture itself needs to contain a certain amount of water, but it should also be protected from moisture. If the rattan furniture rattle absorbs excessive moisture, it will become soft, the structure is loose, and the plane is drooping. Therefore, the rattan furniture must be placed in a cool and dry place. The place, if it has been damp, be careful not to put its braided shape out of shape, put it in a cool and ventilated place to let it dry naturally, and it will shrink to its original size.

Second, how to remove dust and stubborn

The cleaning of wicker furniture is not difficult, and it can be cultivated slowly. If it is dusty, it can be brushed from inside and outside from the woven mesh with a soft brush. If it is too heavy, use vegetable oil, soap, etc. as a cleaning agent to gently wipe it off. Finally, wipe it with a clean rag. If it is white rattan furniture, finally apply a little white vinegar to neutralize the detergent to prevent discoloration of the rattan furniture. In addition, you can also use a brush to apply a little baking soda to lightly brush the rattan furniture, and also effectively remove the stubborn dirt of the rattan furniture.

Third, skillfully use salt water

If the wicker furniture is used for too long and there is no cleaning, there will be some stubborn dirt. In this case, it is best to use a light salt water for scrubbing. The use of light salt water to clean the rattan furniture can not only decontaminate, but also keep the rattan flexible. Flexible.

Fourth, insect protection

If the wicker furniture is not easily protected from insects, it must be treated with insects. Insecticides can be soaked with 1% to 3% bleach. It can also be sprayed with a mosquito-repellent phoenix that is available on the market or with boiled boiling water. After treatment, it is naturally air-dried in a cool and ventilated place, and then a layer of varnish is applied to the surface of the rattan furniture, and then repeated every two to three years to ensure that the wicker furniture is not threatened by insects.

Five, loose handling

Once the wicker furniture has been found to be loose, it must be dealt with immediately. Immediately tie the loose area and let the loose parts fall back in time. Otherwise, it will loosen and fall off in other places. If the furniture is scrapped, it is best after the new binding. Re-paint a layer of varnish at the ligature to help strengthen the lashing.

Six, depression treatment

After the wicker furniture has been used for a long time, the seat cushion and the backrest portion are easily recessed. In this case, the concave part can be soaked in water, must be soaked in water, and then dried in the sun, remember not to expose to the sun for too long, after it is restored, it should be immediately put up and placed in a cool and ventilated place to let it dry naturally. For a period of time, use it immediately after it has not been restored, and then apply varnish on both sides of the restored inside and outside.

Seven, to prevent excessive heat drying

Wicker furniture should be placed in the heating, fireplace and stove next time. Placement in the above place for a long time will cause the material of the rattan furniture to become dry, brittle, lose elasticity and flexibility, and easily wrinkle and break. At the same time, avoid long-term sun exposure after cleaning. It should be placed in a cool, ventilated place to allow it to air dry. In addition, the hair dryer that has just been used, the iron should not be placed directly on the top, otherwise it may be partially discolored according to the wicker furniture, affecting the appearance.

More information pls check at