Maintenance knowledge of rattan furniture

- Oct 27, 2018-

OM101


Rattan furniture should avoid high temperature and dry environment. If it is placed too dry or at a high temperature for a long time, it is prone to cracking. Therefore, it is usually cleaned, preferably with a damp cloth to extend its service life. At the same time, the rattan furniture can not be excessively damp, especially the legs and legs that have been in contact with the ground for a long time, and cannot be soaked in water for a long time. Rattan furniture needs to absorb a certain amount of water, but it should not be excessive. If the excessive amount of water is adsorbed, the rattan of the rattan furniture becomes soft, the rattan structure is loose, and the flat portion is drooping. Therefore, when the rattan furniture is damp, be careful not to let the shape of the braided shape be deformed. It should be placed in a cool and ventilated place to let it dry naturally, that is, the natural contraction returns to its original appearance.


Remember, do not expose to the sun, let it dry naturally. Many people think that the cleaning of rattan furniture is very troublesome, but it is not. Slowly doing it can also be cultivated. The rattan furniture has many gaps because it is made of rattan. After a long time of use, it will accumulate some dust between the gaps. It can directly wash the stubborn stains in the gap with clean water. Gently brush the dust out inside and out. If the stain is too stubborn, use vegetable oil or soap as a cleaning agent to clear stubborn stains. Finally, dry it with a dry rag and place it in a well ventilated place to allow it to air dry. If the rattan furniture is white, you need to smear a little bit of white to neutralize it with detergent to prevent discoloration. Baking soda can also be used as a cleaning agent for rattan furniture.


If the joint is found to be loose and cracked, the joint can be wetted with water, the rattan will become soft after soaking, and then the joint will be re-bundled tightly, and it will become firm and firm after it is dried. Then apply a layer of varnish to the repaired area. The backrest of the rattan furniture and the place of the seat cushion are easy to sag for a long time. In this case, the depression can be bubbled, and then placed in a ventilated place to be air-dried, and the depression will naturally recover after drying.


More rattan furniture items, welcome visit www.chinaoutsidefurniture.com